Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { YTokenL2 } from "./YTokenL2.sol";
import { Common } from "../../libs/Common.sol";
import { IManager, ManageAssetAndShares } from "../interface/IManager.sol";
import { IBlackList } from "../../administrator/interface/IBlackList.sol";
import { IVYToken } from "../interface/IVYToken.sol";

contract vyTokenL2 is YTokenL2, IVYToken {

    address public yToken;
    mapping(address => bool) public strategyAddress; 

    uint256 public guardrailMultiplier;

    using SafeERC20 for IERC20;

    // Storage gap for upgradeable pattern
    uint256[29] private __l2Gap;

    /**
     * @notice Disable initializer for the implementation contract
     */
     /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() { 
        _disableInitializers();
    }

    function setYTokenAndAllowance(address _yToken) external onlyAdmin {
        require(Common.isContract(_yToken), "!yToken");
        require(YTokenL2(_yToken).asset() == asset(), "!asset");
        yToken = _yToken;
        // Give infinite allowance to yToken through forceApprove
        IERC20(asset()).forceApprove(_yToken, type(uint256).max);
        emit YTokenSet(_yToken);
    }

    function setGuardrailMultiplier(uint256 _guardrailMultiplier) external onlyAdmin {
        guardrailMultiplier = _guardrailMultiplier;
        emit GuardrailMultiplierSet(_guardrailMultiplier);
    }

    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal override nonReentrant notPaused {
        require(receiver != address(0) && assets > 0 && shares > 0, "!valid");
        require(!IBlackList(administrator).isBlackListed(caller) && !IBlackList(administrator).isBlackListed(receiver), "blacklisted");
        // check shares to be minted is greater than minSharesInYToken so that redeem is not blocked
        require(shares >= IManager(manager).minSharesInYToken(yToken), "!minShares");

        // Transfer assets to the vault for deposit
        IERC20(asset()).safeTransferFrom(caller, address(this), assets);

        // mint yToken to itself by depositing to the yToken vault
        YTokenL2(yToken).deposit(assets, address(this));

         // Calculate total shares before fee (this is what the assets are truly worth)
        uint256 totalShares = convertToShares(assets);

        // as shares is after fee deduction due to modified previewDeposit & previewMint
        uint256 feeShare = totalShares - shares;

        // mint feeShare to treasury of Manager
        _mint(IManager(manager).treasury(), feeShare);

        // Mint shares to receiver, this is the share after fee deduction
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }
    function mintYToken(address to, uint256 shares, bool isNewYToken) external override {
        require(msg.sender == manager, "!manager");
        // minting vyToken to receiver
        _mint(to, shares);
        // corresponding shares of yToken based on assets
        if(isNewYToken) {
            uint256 assets = convertToAssets(shares);
            uint256 yShares = YTokenL2(yToken).convertToShares(assets);

            require(yShares <= guardrailMultiplier * shares, "!vyTokenGuardrail");
            // can pass isNewYToken here as it is not used in yToken
            ManageAssetAndShares memory manageAssetAndShares = ManageAssetAndShares({yToken: yToken, shares: yShares, assetAmount: assets, updateAsset: true, isMint: true, isNewYToken: isNewYToken});
            IManager(manager).manageAssetAndShares(address(this), manageAssetAndShares);
        }
    }

    // mints vyToken by depositing yToken
    // only updates Assets of vyToken to avoid double counting
    function depositYToken(address to, uint256 amountYToken) external override nonReentrant notPaused {
        require(to != address(0) && amountYToken > 0, "!valid");
        require(!IBlackList(administrator).isBlackListed(msg.sender) && !IBlackList(administrator).isBlackListed(to), "blacklisted");

        // transfer yToken to this contract
        IERC20(yToken).safeTransferFrom(msg.sender, address(this), amountYToken);

        // get equivalent assets of yToken
        uint256 assets = YTokenL2(yToken).convertToAssets(amountYToken);

        // get equivalent shares of vyToken based on assets
        uint256 shares = convertToShares(assets);

        // mint vyToken to receiver
        _mint(to, shares);

        emit YTokenDeposit(msg.sender, to, amountYToken, shares);
    }

    function setStrategy(address _strategy, bool _status) external onlyAdmin {
        require(_strategy != address(0), "!strategy");
        strategyAddress[_strategy] = _status;

        emit StrategyAddressSet(_strategy, _status);
    }

    function sendToStrategy(address token, uint256 amount, address strategy) external onlyCollateralManager {
        require(strategyAddress[strategy], "!strategy");
        IERC20(token).safeTransfer(strategy, amount);
        emit PrincipalSent(token, amount, strategy);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reinitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
     *
     * NOTE: Consider following the ERC-7201 formula to derive storage locations.
     */
    function _initializableStorageSlot() internal pure virtual returns (bytes32) {
        return INITIALIZABLE_STORAGE;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        bytes32 slot = _initializableStorageSlot();
        assembly {
            $.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC-4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC-20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC-20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * [CAUTION]
 * ====
 * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning
 * with a "donation" to the vault that inflates the price of a share. This is variously known as a donation or inflation
 * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial
 * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may
 * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by
 * verifying the amount received is as expected, using a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * Since v4.9, this implementation introduces configurable virtual assets and shares to help developers mitigate that risk.
 * The `_decimalsOffset()` corresponds to an offset in the decimal representation between the underlying asset's decimals
 * and the vault decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which
 * itself determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default
 * offset (0) makes it non-profitable even if an attacker is able to capture value from multiple user deposits, as a result
 * of the value being captured by the virtual shares (out of the attacker's donation) matching the attacker's expected gains.
 * With a larger offset, the attack becomes orders of magnitude more expensive than it is profitable. More details about the
 * underlying math can be found xref:ROOT:erc4626.adoc#inflation-attack[here].
 *
 * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued
 * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets
 * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience
 * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the
 * `_convertToShares` and `_convertToAssets` functions.
 *
 * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].
 * ====
 */
abstract contract ERC4626Upgradeable is Initializable, ERC20Upgradeable, IERC4626 {
    using Math for uint256;

    /// @custom:storage-location erc7201:openzeppelin.storage.ERC4626
    struct ERC4626Storage {
        IERC20 _asset;
        uint8 _underlyingDecimals;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC4626")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC4626StorageLocation = 0x0773e532dfede91f04b12a73d3d2acd361424f41f76b4fb79f090161e36b4e00;

    function _getERC4626Storage() private pure returns (ERC4626Storage storage $) {
        assembly {
            $.slot := ERC4626StorageLocation
        }
    }

    /**
     * @dev Attempted to deposit more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);

    /**
     * @dev Attempted to mint more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);

    /**
     * @dev Attempted to withdraw more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);

    /**
     * @dev Attempted to redeem more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC-20 or ERC-777).
     */
    function __ERC4626_init(IERC20 asset_) internal onlyInitializing {
        __ERC4626_init_unchained(asset_);
    }

    function __ERC4626_init_unchained(IERC20 asset_) internal onlyInitializing {
        ERC4626Storage storage $ = _getERC4626Storage();
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        $._underlyingDecimals = success ? assetDecimals : 18;
        $._asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool ok, uint8 assetDecimals) {
        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(
            abi.encodeCall(IERC20Metadata.decimals, ())
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This
     * "original" value is cached during construction of the vault contract. If this read operation fails (e.g., the
     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.
     *
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20Upgradeable) returns (uint8) {
        ERC4626Storage storage $ = _getERC4626Storage();
        return $._underlyingDecimals + _decimalsOffset();
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual returns (address) {
        ERC4626Storage storage $ = _getERC4626Storage();
        return address($._asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual returns (uint256) {
        return IERC20(asset()).balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}. */
    function mint(uint256 shares, address receiver) public virtual returns (uint256) {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {
        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {
        // If asset() is ERC-777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(IERC20(asset()), caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If asset() is ERC-777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(IERC20(asset()), receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _decimalsOffset() internal view virtual returns (uint8) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    /// @custom:storage-location erc7201:openzeppelin.storage.ReentrancyGuard
    struct ReentrancyGuardStorage {
        uint256 _status;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ReentrancyGuardStorageLocation = 0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;

    function _getReentrancyGuardStorage() private pure returns (ReentrancyGuardStorage storage $) {
        assembly {
            $.slot := ReentrancyGuardStorageLocation
        }
    }

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if ($._status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        $._status = ENTERED;
    }

    function _nonReentrantAfter() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        return $._status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Return the 512-bit addition of two uint256.
     *
     * The result is stored in two 256 variables such that sum = high * 2²56 + low.
     */
    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        assembly ("memory-safe") {
            low := add(a, b)
            high := lt(low, a)
        }
    }

    /**
     * @dev Return the 512-bit multiplication of two uint256.
     *
     * The result is stored in two 256 variables such that product = high * 2²56 + low.
     */
    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        // 512-bit multiply [high low] = x * y. Compute the product mod 2²56 and mod 2²56 - 1, then use
        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
        // variables such that product = high * 2²56 + low.
        assembly ("memory-safe") {
            let mm := mulmod(a, b, not(0))
            low := mul(a, b)
            high := sub(sub(mm, low), lt(mm, low))
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            success = c >= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a - b;
            success = c <= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a * b;
            assembly ("memory-safe") {
                // Only true when the multiplication doesn't overflow
                // (c / a == b) || (a == 0)
                success := or(eq(div(c, a), b), iszero(a))
            }
            // equivalent to: success ? c : 0
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `DIV` opcode returns zero when the denominator is 0.
                result := div(a, b)
            }
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `MOD` opcode returns zero when the denominator is 0.
                result := mod(a, b)
            }
        }
    }

    /**
     * @dev Unsigned saturating addition, bounds to `2²56 - 1` instead of overflowing.
     */
    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryAdd(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.
     */
    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {
        (, uint256 result) = trySub(a, b);
        return result;
    }

    /**
     * @dev Unsigned saturating multiplication, bounds to `2²56 - 1` instead of overflowing.
     */
    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryMul(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);

            // Handle non-overflow cases, 256 by 256 division.
            if (high == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return low / denominator;
            }

            // Make sure the result is less than 2²56. Also prevents denominator == 0.
            if (denominator <= high) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [high low].
            uint256 remainder;
            assembly ("memory-safe") {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                high := sub(high, gt(remainder, low))
                low := sub(low, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly ("memory-safe") {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [high low] by twos.
                low := div(low, twos)

                // Flip twos such that it is 2²56 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from high into low.
            low |= high * twos;

            // Invert denominator mod 2²56. Now that denominator is an odd number, it has an inverse modulo 2²56 such
            // that denominator * inv = 1 mod 2²56. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 24.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 28
            inverse *= 2 - denominator * inverse; // inverse mod 2¹6
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 264
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²8
            inverse *= 2 - denominator * inverse; // inverse mod 2²56

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²56. Since the preconditions guarantee that the outcome is
            // less than 2²56, this is the final result. We don't need to compute the high bits of the result and high
            // is no longer required.
            result = low * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.
     */
    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);
            if (high >= 1 << n) {
                Panic.panic(Panic.UNDER_OVERFLOW);
            }
            return (high << (256 - n)) | (low >> n);
        }
    }

    /**
     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.
     */
    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {
        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax = 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) = 1 mod p`. As a consequence, we have `a * a**(p-2) = 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `e_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) = sqrt(a) < 2**e`). We know that `e = 128` because `(2¹²8)² = 2²56` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) = sqrt(a) < 2**e ? (2**(e-1))² = a < (2**e)² ? 2**(2*e-2) = a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) = sqrt(a) < 2**e = 2 * x_n`. This implies e_n = 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to e_n = 2**(e-2).
            // This is going to be our x_0 (and e_0)
            xn = (3 * xn) >> 1; // e_0 := | x_0 - sqrt(a) | = 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n4 + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n4 + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n4 - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              = 0
            // Which proves that for all n = 1, sqrt(a) = x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // e_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | e_n² / (2 * x_n) |
            //         = e_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // e_1 = e_0² / | (2 * x_0) |
            //     = (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     = 2**(2*e-4) / (3 * 2**(e-1))
            //     = 2**(e-3) / 3
            //     = 2**(e-3-log2(3))
            //     = 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) = sqrt(a) = x_n:
            // e_{n+1} = e_n² / | (2 * x_n) |
            //         = (2**(e-k))² / (2 * 2**(e-1))
            //         = 2**(2*e-2*k) / 2**e
            //         = 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // e_1 := | x_1 - sqrt(a) | = 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // e_2 := | x_2 - sqrt(a) | = 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // e_3 := | x_3 - sqrt(a) | = 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // e_4 := | x_4 - sqrt(a) | = 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // e_5 := | x_5 - sqrt(a) | = 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // e_6 := | x_6 - sqrt(a) | = 2**(e-144)  -- general case with k = 72

            // Because e = 128 (as discussed during the first estimation phase), we know have reached a precision
            // e_6 = 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // If upper 8 bits of 16-bit half set, add 8 to result
        r |= SafeCast.toUint((x >> r) > 0xff) << 3;
        // If upper 4 bits of 8-bit half set, add 4 to result
        r |= SafeCast.toUint((x >> r) > 0xf) << 2;

        // Shifts value right by the current result and use it as an index into this lookup table:
        //
        // | x (4 bits) |  index  | table[index] = MSB position |
        // |------------|---------|-----------------------------|
        // |    0000    |    0    |        table[0] = 0         |
        // |    0001    |    1    |        table[1] = 0         |
        // |    0010    |    2    |        table[2] = 1         |
        // |    0011    |    3    |        table[3] = 1         |
        // |    0100    |    4    |        table[4] = 2         |
        // |    0101    |    5    |        table[5] = 2         |
        // |    0110    |    6    |        table[6] = 2         |
        // |    0111    |    7    |        table[7] = 2         |
        // |    1000    |    8    |        table[8] = 3         |
        // |    1001    |    9    |        table[9] = 3         |
        // |    1010    |   10    |        table[10] = 3        |
        // |    1011    |   11    |        table[11] = 3        |
        // |    1100    |   12    |        table[12] = 3        |
        // |    1101    |   13    |        table[13] = 3        |
        // |    1110    |   14    |        table[14] = 3        |
        // |    1111    |   15    |        table[15] = 3        |
        //
        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.
        assembly ("memory-safe") {
            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))
        }
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8
        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        assembly ("memory-safe") {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

import { ReentrancyGuardUpgradeable } from "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";

import { Common } from "../libs/Common.sol";
import { Constants } from "../libs/Constants.sol";

import { IBlackList } from "./interface/IBlackList.sol";
import { IPausable } from "./interface/IPausable.sol";
import { IRole } from "./interface/IRole.sol";

// To define all the access modifiers
abstract contract Access is ReentrancyGuardUpgradeable {
    address public administrator;
    event AdministratorSet(address indexed caller, address indexed newAdministrator);

    /**
     * @notice Initialize the contract with administrator address
     * @param _administrator address of the administrator
     */
    function __Access_init(address _administrator) internal onlyInitializing {
        __ReentrancyGuard_init();
        require(_administrator != address(0), "!administrator");
        administrator = _administrator;
    }

    modifier onlyAdmin() {
        require(IRole(administrator).hasRole(Constants.ADMIN_ROLE, msg.sender), "!admin");
        _;
    }

    modifier onlyCollateralManager() {
        require(IRole(administrator).hasRole(Constants.COLLATERAL_MANAGER_ROLE, msg.sender), "!cmgr");
        _;
    }

    modifier onlyBridge() {
        require(IRole(administrator).hasRole(Constants.BRIDGE_ROLE, msg.sender), "!bridge");
        _;
    }

    modifier onlyOperator() {
        require(IRole(administrator).hasRole(Constants.BRIDGE_ROLE, msg.sender) || IRole(administrator).hasRole(Constants.LOCKBOX_ROLE, msg.sender) || IRole(administrator).hasRole(Constants.YIELD_ROLE, msg.sender), "!operator");
        _;
    }

    modifier onlyManager() {
        require(IRole(administrator).hasRole(Constants.MANAGER_ROLE, msg.sender), "!manager");
        _;
    }

    modifier onlyMinterAndRedeemer() {
        require(IRole(administrator).hasRole(Constants.MINTER_AND_REDEEMER_ROLE, msg.sender), "!minter");
        _;
    }

    modifier onlyRewarder() {
        require(IRole(administrator).hasRole(Constants.REWARDER_ROLE, msg.sender), "!rewarder");
        _;
    }

    modifier onlyBond() {
        require(IRole(administrator).hasRole(Constants.BOND_ROLE, msg.sender), "!bond");
        _;
    }

    modifier notPaused() {
        require(!IPausable(administrator).isPaused(address(this)), "paused");
        _;
    }

    modifier notBlacklisted(address user) {
        require(!IBlackList(administrator).isBlackListed(user), "blacklisted");
        _;
    }

    /**
     * @notice Set the administrator address
     * @param _administrator address of the new administrator
     */
    function setAdministrator(address _administrator) external onlyAdmin {
        require(Common.isContract(_administrator), "!contract");
        administrator = _administrator;
        emit AdministratorSet(msg.sender, _administrator);
    }
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

interface IBlackList {
    //functions
    function blackListUsers(address[] calldata _users) external;
    function removeBlackListUsers(address[] calldata _clearedUsers) external;
    function isBlackListed(address _user) external view returns (bool);

    //events
    event BlackListed(address indexed _sender, address indexed _user);
    event BlackListCleared(address indexed _sender, address indexed _user);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

interface IPausable {
    function pause() external;
    function unpause() external;
    function pauseSC(address _sc) external;
    function unpauseSC(address _sc) external;
    function isPaused(address _sc) external view returns (bool);

    //events
    event Paused(address indexed _sender);
    event Unpaused(address indexed _sender);
    event Paused(address indexed _sender, address indexed _sc);
    event Unpaused(address indexed _sender, address indexed _sc);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

interface IRole {
    //functions
    function grantRoles(bytes32 _role, address[] calldata _accounts) external;
    function revokeRoles(bytes32 _role, address[] calldata _accounts) external;
    function hasRole(bytes32 _role, address _account) external view returns (bool);
    function hasRoles(bytes32[] calldata _role, address[] calldata _accounts) external view returns (bool[] memory);

    //events
    event RoleGranted(bytes32 indexed _role, address indexed _sender, address indexed _account);
    event RoleRevoked(bytes32 indexed _role, address indexed _sender, address indexed _account);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

/**
 * @notice ManageAssetAndShares is used to manage the asset and shares of the yToken
 * @param yToken The address of the yToken
 * @param shares The number of shares to manage
 * @param assetAmount The amount of asset to manage
 * @param updateAsset Whether to update the asset
 * @param isMint Whether to mint or burn the yToken
 * @param isNewYToken Whether the yToken is new, only utilised in vyToken and vyTokenL2 whenever asset from outside of 
        YieldFi is deposited into the protocol (i.e during deposits and yield distribution)
  */
struct ManageAssetAndShares {
    address yToken;
    uint256 shares;
    uint256 assetAmount;
    bool updateAsset;
    bool isMint;
    bool isNewYToken;
}
interface IManager {
    event Deposit(address indexed caller, address indexed asset, uint256 amount, address indexed receiver, address yToken, uint256 shares, uint256 feeShare, uint256 gasFeeShare);
    event Withdraw(address indexed caller, address indexed asset, uint256 amount, address indexed receiver, address yToken, uint256 shares, uint256 feeShare, uint256 gasFeeShare);
    event Rescue(address indexed caller, address indexed token, address indexed to, uint256 amount);
    event AssetStatus(bool indexed orderType, address indexed yToken, address indexed asset, bool status);
    event OrderRequest(address caller, address indexed yToken, address indexed asset, address indexed receiver, uint256 amount, bool orderType, uint256 exchangeRateInUnderlying, uint256 receiptId, bytes32 referralCode);
    event YieldFeesTransferred(address indexed treasury, address indexed yToken, uint256 shares);
    event AssetAndShareManaged(address indexed caller, address indexed yToken, uint256 shares, uint256 assetAmount, bool updateAsset, bool isMint, bool isNewYToken);
    event TreasurySet(address indexed caller, address indexed treasury);
    event ReceiptSet(address indexed caller, address indexed receipt);
    event CustodyWalletSet(address indexed caller, address indexed wallet, bool status);
    event MinSharesInYTokenSet(address indexed caller, address indexed yToken, uint256 minShares);
    event MaxRedeemCapSet(address indexed caller, address indexed yToken, uint256 maxRedeemCap);
    event InstantRedeem(address caller, address indexed yToken, address indexed asset, address indexed receiver, uint256 amount);

    function deposit(address _yToken, address _asset, uint256 _amount, address _receiver, address _callback, bytes calldata _callbackData, bytes32 _referralCode) external;
    function redeem(address caller, address _yToken, address _asset, uint256 _shares, address _receiver, address _callback, bytes calldata _callbackData) external;
    function executeOrder(uint256 _receiptId, uint256 _amount, uint256 _fee, uint256 _gas) external;
    function transferToCustodyWallet(address _token, address _receiver, uint256 _amount) external;
    function treasury() external view returns (address);
    function manageAssetAndShares(address _to, ManageAssetAndShares memory _manageAssetAndShares) external;
    function minSharesInYToken(address _yToken) external view returns (uint256);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

/**
 * @title IOracleAdapter
 * @notice Minimal interface for oracle adapter that connects to price oracles
 */
interface IOracleAdapter {
    event OracleSet(address indexed caller, address indexed token, address indexed oracle);
    event StaleThresholdSet(address indexed caller, address indexed token, uint256 staleThreshold);
    event SequencerUptimeFeedSet(address indexed caller, address indexed sequencerUptimeFeed);

    /**
     * @notice Get the latest exchange rate for a token
     * @param token Address of the token to get exchange rate for
     * @return The exchange rate scaled to 1e18 (same as PINT)
     */
    function fetchExchangeRate(address token) external view returns (uint256);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;


interface IVYToken {
    // functions
    function yToken() external view returns (address);
    function strategyAddress(address) external view returns (bool);
    function setYTokenAndAllowance(address _yToken) external;
    function setStrategy(address _strategy, bool _status) external;
    function sendToStrategy(address token, uint256 amount, address strategy) external;
    function depositYToken(address to, uint256 amountYToken) external;
    // events
    event YTokenSet(address indexed yToken);
    event StrategyAddressSet(address indexed strategy, bool status);
    event PrincipalSent(address indexed token, uint256 amount, address indexed strategy);
    event YTokenDeposit(address indexed sender, address indexed receiver, uint256 amountYToken, uint256 shares);
    event GuardrailMultiplierSet(uint256 guardrailMultiplier);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

interface IYToken {
    // functions
    function transferInRewards(uint256 amount, bool profit) external;
    function exchangeRate() external view returns (uint256);
    function mintYToken(address to, uint256 amount, bool isNewYToken) external;
    function burnYToken(address from, uint256 amount) external;
    function updateTotalAssets(uint256 amount, bool add) external;
    function fee() external view returns (uint256);
    // events
    event TransferRewards(address indexed caller, uint256 amount);
    event ManagerSet(address indexed caller, address indexed manager);
    event FeeSet(address indexed caller, uint256 fee);
    event GasFeeSet(address indexed caller, uint256 gasFee);
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

import { Access } from "../../administrator/Access.sol";
import { Common } from "../../libs/Common.sol";
import { Constants } from "../../libs/Constants.sol";
import { IBlackList } from "../../administrator/interface/IBlackList.sol";
import { IYToken } from "../interface/IYToken.sol";
import { IManager } from "../interface/IManager.sol";
import { IOracleAdapter } from "../interface/IOracleAdapter.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { IERC20Metadata } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { ERC4626Upgradeable } from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

event Rescue(address indexed caller, address indexed token, address indexed to, uint256 amount);
event OracleSet(address indexed caller, address indexed oracle);

/**
 * @title YTokenL2
 * @notice L2 version of YToken that uses oracles for price calculations
 * @dev Inherits from ERC4626 and overrides accounting functions to use oracle values
 *      This version relies on oracle for exchange rate rather than internal accounting
 */
contract YTokenL2 is Access, ERC4626Upgradeable, IYToken {
    address public oracle; // Address of the oracle adapter
    address public manager;
    uint256 public fee;
    uint256 public gasFee;

    using Math for uint256;

    // Storage gap for upgradeable pattern
    uint256[28] private __l2Gap;

    using SafeERC20 for IERC20;

    /**
     * @notice Disable initializer for the implementation contract
     */
     /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    /**
     * @notice Initialize the L2 token
     * @dev Uses a different initializer name to avoid conflicts with parent
     * @param _name The name of the token
     * @param _symbol The symbol of the token
     * @param _administrator The administrator contract
     */
    function init(string memory _name, string memory _symbol, address _administrator, address _manager, address _asset) public initializer {
        require(Common.isContract(_administrator), "!valid");
        require(Common.isContract(_manager), "!valid");
        require(Common.isContract(_asset), "!valid");
        __ERC20_init(_name, _symbol);
        __Access_init(_administrator);
        __ERC4626_init(IERC20(_asset));
        manager = _manager;
    }

    /**
     * @notice Set the oracle adapter for exchange rate
     * @dev Can only be called by the administrator
     * @param _oracle The oracle adapter contract address
     */
    function setOracle(address _oracle) external onlyAdmin {
        require(Common.isContract(_oracle), "!oracle");
        oracle = _oracle;
        emit OracleSet(msg.sender, _oracle);
    }

    /**
     * @notice Set the manager contract
     * @dev Can only be called by the administrator
     * @param _manager The new manager contract
     */
    function setManager(address _manager) external onlyAdmin {
        require(Common.isContract(_manager), "!manager");
        manager = _manager;
        emit ManagerSet(msg.sender, _manager);
    }

    /**
     * @notice Set the fee percentage for the YToken
     * @param _fee Fee percentage (max 1% = Constants.ONE_PERCENT)
     */
    function setFee(uint256 _fee) external onlyAdmin {
        require(_fee <= Constants.ONE_PERCENT, "!fee");
        fee = _fee;
        emit FeeSet(msg.sender, _fee);
    }

    /**
     * @notice Set the gas fee for withdrawals
     * @param _gasFee Gas fee in absolute units of underlying asset, but paid in YToken
     * @dev In preview functions, gasFee is accounted for in the calculations
     */
    function setGasFee(uint256 _gasFee) external onlyMinterAndRedeemer {
        gasFee = _gasFee;
        emit GasFeeSet(msg.sender, _gasFee);
    }

    /**
     * @notice Not implemented in L2, kept for interface compatibility
     * @dev L2 tokens don't use internal reward accounting, they rely on oracle prices
     */
    function transferInRewards(uint256, bool) external pure override {
        revert("L2: Not implemented");
    }

    /**
     * @notice Get the current exchange rate for the token
     * @dev Returns the rate from oracle adapter in underlying asset decimals
     * @return Current exchange rate in underlying asset decimals (e.g., 6 decimals for USDC)
     */
    function exchangeRate() public view returns (uint256) {
        require(oracle != address(0), "Oracle not set");

        uint256 rate = IOracleAdapter(oracle).fetchExchangeRate(address(this));
        require(rate > 0, "Invalid rate");

        // Convert from 18 decimals to asset decimals
        uint8 assetDecimals = IERC20Metadata(asset()).decimals();
        if (assetDecimals < 18) {
            return rate / (10 ** (18 - assetDecimals));
        }
        return rate;
    }

    /**
     * @notice Returns the current exchange rate for the token scaled to 18 decimals
     * @notice This is not used anywhere in the contract, but kept for compatibility
     * with oracles that expect exchangeRate in 18 decimals
     */
    function exchangeRateScaled() public view returns (uint256) {
        require(oracle != address(0), "Oracle not set");
        uint256 rate = IOracleAdapter(oracle).fetchExchangeRate(address(this));
        require(rate > 0, "Invalid rate");
        // as oracleAdapter always returns 18 decimals, we can simply return the rate
        return rate;
    }

    /**
     * @notice Override totalAssets to use oracle price
     * @return Total assets based on current shares and exchange rate
     */
    function totalAssets() public view override returns (uint256) {
        uint256 supply = totalSupply();
        if (supply == 0) {
            return 0;
        }

        // Calculate total assets based on exchange rate and total supply
        // For 1e18 shares, we get exchangeRate() assets
        return (supply * exchangeRate()) / Constants.PINT;
    }

    // Override _deposit to ensure assets go to manager
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual override nonReentrant notPaused {
        require(receiver != address(0) && assets > 0 && shares > 0, "!valid");
        require(!IBlackList(administrator).isBlackListed(caller) && !IBlackList(administrator).isBlackListed(receiver), "blacklisted");
        // check shares to be minted is greater than minSharesInYToken so that redeem is not blocked
        require(shares >= IManager(manager).minSharesInYToken(address(this)), "!minShares");
        // Transfer assets to manager instead of this contract
        IERC20(asset()).safeTransferFrom(caller, manager, assets);

        // Calculate total shares before fee (this is what the assets are truly worth)
        uint256 totalShares = super.previewDeposit(assets);

        // as shares is after fee deduction due to modified previewDeposit & previewMint
        uint256 feeShare = totalShares - shares;

        // mint feeShare to treasury of Manager
        _mint(IManager(manager).treasury(), feeShare);

        // Mint shares to receiver, this is the share after fee deduction
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    // Override _withdraw to request funds from manager
    function _withdraw(address caller, address receiver, address owner, uint256 assets, uint256 shares) internal virtual override nonReentrant notPaused {
        require(receiver != address(0) && owner != address(0) && assets > 0 && shares > 0, "!valid");
        require(!IBlackList(administrator).isBlackListed(caller) && !IBlackList(administrator).isBlackListed(receiver), "blacklisted");
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }
        // Instead of burning shares here, just redirect to Manager
        // Don't update totAssets here either, as the assets haven't left the system yet
        // shares should be redeemed from owner
        IManager(manager).redeem(owner, address(this), asset(), shares, receiver, address(0), "");
    }

    /**
     * @notice Mints YTokens to a specified address
     * @dev Can only be called by the manager contract
     * @param to Address to mint tokens to
     * @param shares Amount of YTokens to mint
     */
    function mintYToken(address to, uint256 shares, bool) external virtual {
        require(msg.sender == manager, "!manager");
        _mint(to, shares);
    }

    /**
     * @notice Burns YTokens from a specified address
     * @dev Can only be called by the manager contract
     * @param from Address to burn tokens from
     * @param shares Amount of YTokens to burn
     */
    function burnYToken(address from, uint256 shares) external {
        require(msg.sender == manager, "!manager");
        _burn(from, shares);
    }

    // Hook that is called before any transfer of tokens. This includes minting and burning. Disables transfers from or to blacklisted addresses.
    function _update(address from, address to, uint256 value) internal virtual override {
        require(!IBlackList(administrator).isBlackListed(from) && !IBlackList(administrator).isBlackListed(to), "blacklisted");
        super._update(from, to, value);
    }

    function rescue(address _token, address _user, uint256 _amount) external onlyAdmin {
        require(_token != address(0), "!token");
        require(_user != address(0) && _amount > 0, "!user !amount");
        IERC20(_token).safeTransfer(_user, _amount);
        emit Rescue(msg.sender, _token, _user, _amount);
    }

    /**
     * @notice Preview how many shares will be minted for a deposit
     * @dev Accounts for fees taken in yToken terms
     * @param assets Amount of assets being deposited
     * @return Shares that will be received after fees
     * @dev In deposit related functions, no gas fee is taken as it is one step process
     */
    function previewDeposit(uint256 assets) public view virtual override returns (uint256) {
        // Calculate shares based on correct rounding direction
        uint256 shares = _convertToShares(assets, Math.Rounding.Floor);

        // Calculate and subtract fee (taken in shares)
        uint256 feeShares = (shares * fee) / Constants.HUNDRED_PERCENT;

        // Return net shares after fee
        return shares - feeShares;
    }

    /**
     * @notice Preview how many assets are needed to mint a specific amount of shares
     * @dev Accounts for fees taken in yToken terms
     * @param shares Amount of shares requested
     * @return Assets needed for minting after accounting for fees
     * @dev In deposit related functions, no gas fee is taken as it is one step process
     */
    function previewMint(uint256 shares) public view virtual override returns (uint256) {
        // Since the fee is taken in shares, we need to calculate the gross shares needed

        // If we want X shares after fee, we need to mint X/(1-fee%) shares before fee
        // For example, to get 95 shares with 5% fee, we need to mint 100 shares initially
        uint256 grossShares = (shares * Constants.HUNDRED_PERCENT) / (Constants.HUNDRED_PERCENT - fee);

        // Calculate assets based on exchange rate
        return _convertToAssets(grossShares, Math.Rounding.Ceil);
    }

    /**
    * @notice Preview how many shares are needed to withdraw a specific amount of assets
    * @dev Accounts for fees taken in yToken terms and fixed gas fees for withdrawal
    * @param assets Amount of assets requested
    * @return Shares that need to be burned, including fee shares and gas fee shares

    */
    function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {
        // Calculate shares needed for requested assets based on exchange rate
        uint256 sharesWithoutFee = _convertToShares(assets, Math.Rounding.Ceil);

        // Account for the percentage fee
        uint256 sharesWithFee = (sharesWithoutFee * Constants.HUNDRED_PERCENT) / (Constants.HUNDRED_PERCENT - fee);

        // Convert gas fee to shares, gasFee is in absolute value of underlying
        uint256 gasFeeShares = _convertToShares(gasFee, Math.Rounding.Ceil);

        // Add gas fee shares to total shares needed
        uint256 totalShares = sharesWithFee + gasFeeShares;

        return totalShares;
    }

    /**
     * @notice Preview how many assets will be received for redeeming a specific amount of shares
     * @dev Accounts for fees taken in yToken terms and fixed gas fees for withdrawal
     * @param shares Amount of shares being redeemed
     * @return Assets that will be received after fees
     *
     * @dev Example with realistic decimals:
     * - User has 1000e18 YToken (1000 tokens with 18 decimals)
     * - Exchange rate: 1 YToken = 1.1 USDC (USDC has 6 decimals)
     * - Percentage fee: 0.1% = 1e18 YToken = 1.1e6 USDC
     * - Gas fee: fixed in Underlying token but paid in YToken = $2.2 (for example) = 2e18 YToken
     * - User redeems 1000e18 YToken
     * - Base value: 1100e6 USDC
     * - After fees: 1100e6 - 1.1e6 - 2.2e6 = 1096.7e6 USDC
     */
    function previewRedeem(uint256 shares) public view virtual override returns (uint256) {
        // Convert gas fee to shares, gasFee is in absolute value of underlying
        uint256 gasFeeShares = _convertToShares(gasFee, Math.Rounding.Ceil);

        if (gasFeeShares > shares) {
            return 0;
        }

        // take out gasFeeShares from shares (fee should not be applied on gasFee)
        uint256 sharesAfterGasFee = shares - gasFeeShares;

        // Calculate fee in shares
        uint256 feeShares = (sharesAfterGasFee * fee) / Constants.HUNDRED_PERCENT;

        // Calculate assets for remaining shares (after fee)
        uint256 remainingShares = sharesAfterGasFee - feeShares;

        // Convert remaining shares to assets
        uint256 assets = _convertToAssets(remainingShares, Math.Rounding.Floor);

        return assets;
    }

    function _decimalsOffset() internal view virtual override returns (uint8) {
        return 18 - IERC20Metadata(asset()).decimals();
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     * Overridden to use oracle-based exchange rate directly instead of totalAssets/totalSupply
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual override returns (uint256) {
        return assets.mulDiv(Constants.PINT, exchangeRate(), rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     * Overridden to use oracle-based exchange rate directly instead of totalAssets/totalSupply
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual override returns (uint256) {
        return shares.mulDiv(exchangeRate(), Constants.PINT, rounding);
    }

    /**
     * @notice For interface compatibility, no-op in L2
     * @dev L2 tokens don't maintain internal asset accounting, they rely on oracle prices
     */
    function updateTotalAssets(uint256, bool) external pure override {
        // do nothing as we don't maintain internal asset accounting
        // can't revert as makes a call during redeem, so we just return
        // totalAssets are not needed to be implemented here as it is calulated using
        // exchangeRate() in totalAssets() function
        return;
    }
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

library Common {
    /**
     * @notice Check if an address is a contract
     * @param _addr address to check
     * @return true if the address is a contract, false otherwise
     */
    function isContract(address _addr) internal view returns (bool) {
        return _addr != address(0) && _addr.code.length != 0;
    }
}

// SPDX-License-Identifier: GPL-2.0
pragma solidity ^0.8.20;

library Constants {
    // admin role
    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN");

    // role for minting and redeeming tokens
    bytes32 public constant MINTER_AND_REDEEMER_ROLE = keccak256("MINTER_AND_REDEEMER");

    // role for collateral manager who can transfer collateral
    bytes32 public constant COLLATERAL_MANAGER_ROLE = keccak256("COLLATERAL_MANAGER");

    // role for rewarder who can transfer reward
    bytes32 public constant REWARDER_ROLE = keccak256("REWARDER");

    // role for managing blacklist addresses
    bytes32 public constant MANAGER_ROLE = keccak256("MANAGER");

    // role assigned to bridges
    bytes32 public constant BRIDGE_ROLE = keccak256("BRIDGE");

    // role for perpetual bond
    bytes32 public constant BOND_ROLE = keccak256("BOND");

    // role for lockbox
    bytes32 public constant LOCKBOX_ROLE = keccak256("LOCKBOX");

    // role for yield
    bytes32 public constant YIELD_ROLE = keccak256("YIELD");

    uint256 constant PINT = 1e18;
    uint256 constant HUNDRED_PERCENT = 100e18;
    uint256 constant ONE_PERCENT = 1e18;
    uint256 constant HUNDRED = 100;

    // Period for vesting strategy rewards
    uint256 constant VESTING_PERIOD = 24 hours;


    // Bridge transaction types
    bytes32 public constant BRIDGE_SEND_HASH = keccak256("BRIDGE_SEND");
}

{
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "appendCBOR": true,
    "bytecodeHash": "ipfs",
    "useLiteralContent": false
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "remappings": [
    "@layerzerolabs/oft-evm/=lib/devtools/packages/oft-evm/",
    "@layerzerolabs/oapp-evm/=lib/devtools/packages/oapp-evm/",
    "@layerzerolabs/lz-evm-protocol-v2/=lib/layerzero-v2/packages/layerzero-v2/evm/protocol/",
    "@layerzerolabs/lz-evm-messagelib-v2/=lib/layerzero-v2/packages/layerzero-v2/evm/messagelib/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin-upgradeable/contracts/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@chainlink/contracts-ccip/=lib/chainlink/contracts/",
    "@chainlink/contracts/=lib/chainlink/contracts/",
    "solidity-bytes-utils/=lib/solidity-bytes-utils/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "chainlink/=lib/chainlink/",
    "devtools/=lib/devtools/packages/toolbox-foundry/src/",
    "ds-test/=lib/layerzero-v2/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "layerzero-v2/=lib/layerzero-v2/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "viaIR": true
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxDeposit","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxMint","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxRedeem","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxWithdraw","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"newAdministrator","type":"address"}],"name":"AdministratorSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"uint256","name":"fee","type":"uint256"}],"name":"FeeSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"uint256","name":"gasFee","type":"uint256"}],"name":"GasFeeSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"guardrailMultiplier","type":"uint256"}],"name":"GuardrailMultiplierSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"manager","type":"address"}],"name":"ManagerSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"oracle","type":"address"}],"name":"OracleSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":true,"internalType":"address","name":"strategy","type":"address"}],"name":"PrincipalSent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Rescue","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"strategy","type":"address"},{"indexed":false,"internalType":"bool","name":"status","type":"bool"}],"name":"StrategyAddressSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TransferRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Withdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountYToken","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"YTokenDeposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"yToken","type":"address"}],"name":"YTokenSet","type":"event"},{"inputs":[],"name":"administrator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"burnYToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amountYToken","type":"uint256"}],"name":"depositYToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"exchangeRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"exchangeRateScaled","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"fee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"gasFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"guardrailMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"address","name":"_administrator","type":"address"},{"internalType":"address","name":"_manager","type":"address"},{"internalType":"address","name":"_asset","type":"address"}],"name":"init","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"manager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"bool","name":"isNewYToken","type":"bool"}],"name":"mintYToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"oracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_user","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"rescue","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"strategy","type":"address"}],"name":"sendToStrategy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_administrator","type":"address"}],"name":"setAdministrator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_fee","type":"uint256"}],"name":"setFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_gasFee","type":"uint256"}],"name":"setGasFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_guardrailMultiplier","type":"uint256"}],"name":"setGuardrailMultiplier","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_manager","type":"address"}],"name":"setManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_oracle","type":"address"}],"name":"setOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_strategy","type":"address"},{"internalType":"bool","name":"_status","type":"bool"}],"name":"setStrategy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_yToken","type":"address"}],"name":"setYTokenAndAllowance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"strategyAddress","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bool","name":"","type":"bool"}],"name":"transferInRewards","outputs":[],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bool","name":"","type":"bool"}],"name":"updateTotalAssets","outputs":[],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"yToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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