Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ERC20Upgradeable, IERC20} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import {Ownable2StepUpgradeable} from "@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {BitcoinUtils} from "../libs/BitcoinUtils.sol";
import {IBascule} from "../bascule/interfaces/IBascule.sol";
import {INotaryConsortium} from "../consortium/INotaryConsortium.sol";
import {IAssetRouter} from "./interfaces/IAssetRouter.sol";
import {Actions} from "../libs/Actions.sol";
import {IStakedLBTC} from "./interfaces/IStakedLBTC.sol";
import {IBaseLBTC} from "./interfaces/IBaseLBTC.sol";
import {Assert} from "./libraries/Assert.sol";
import {Validation} from "./libraries/Validation.sol";
import {Redeem} from "./libraries/Redeem.sol";
import {BaseLBTC} from "./BaseLBTC.sol";

/**
 * @title ERC20 representation of Lombard Staked Bitcoin
 * @author Lombard.Finance
 * @notice This contract is part of the Lombard.Finance protocol
 */
contract StakedLBTC is IStakedLBTC, BaseLBTC, Ownable2StepUpgradeable {
    using SafeERC20 for IERC20;

    /// @dev the storage name differs, because contract was renamed from LBTC
    /// @custom:storage-location erc7201:lombardfinance.storage.LBTC
    struct StakedLBTCStorage {
        /// @dev is keccak256(payload[4:]) used
        /// @custom:oz-renamed-from usedProofs
        mapping(bytes32 => bool) legacyUsedPayloads;
        /// @custom:oz-renamed-from name
        string __removed__name;
        /// @custom:oz-renamed-from symbol
        string __removed__symbol;
        /// @custom:oz-renamed-from isWithdrawalsEnabled
        bool __removed__isWithdrawalsEnabled;
        INotaryConsortium consortium;
        /// @custom:oz-renamed-from isWBTCEnabled
        bool __removed_isWBTCEnabled;
        /// @custom:oz-renamed-from wbtc
        address __removed_wbtc;
        address treasury;
        /// @custom:oz-renamed-from destinations
        mapping(uint256 => address) __removed_destinations;
        /// @custom:oz-renamed-from depositCommission
        mapping(uint256 => uint16) __removed_depositCommission;
        /// @custom:oz-renamed-from usedBridgeProofs
        mapping(bytes32 => bool) __removed_usedBridgeProofs;
        /// @custom:oz-renamed-from globalNonce
        uint256 __removed_globalNonce;
        /// @custom:oz-renamed-from destinations
        mapping(bytes32 => bytes32) __removed__destinations;
        /// @custom:oz-renamed-from depositRelativeCommission
        mapping(bytes32 => uint16) __removed__depositRelativeCommission;
        /// @custom:oz-renamed-from depositAbsoluteCommission
        mapping(bytes32 => uint64) __removed__depositAbsoluteCommission;
        /// @custom:oz-renamed-from burnCommission
        uint64 __removed__burnCommission; // absolute commission to charge on burn (unstake)
        /// @custom:oz-renamed-from burnCommission
        uint256 __removed__dustFeeRate;
        /// Bascule drawbridge used to confirm deposits before allowing withdrawals
        IBascule bascule;
        address pauser;
        mapping(address => bool) minters;
        mapping(address => bool) claimers;
        /// Maximum fee to apply on mints
        /// @custom:oz-renamed-from maximumFee
        uint256 __removed__maximumFee;
        /// @custom:oz-renamed-from usedPayloads
        mapping(bytes32 => bool) __removed__usedPayloads; // sha256(rawPayload) => used
        address operator;
        IAssetRouter assetRouter;
    }

    /// @dev the storage location differs, because contract was renamed from LBTC
    /// keccak256(abi.encode(uint256(keccak256("lombardfinance.storage.LBTC")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant STAKED_LBTC_STORAGE_LOCATION =
        0xa9a2395ec4edf6682d754acb293b04902817fdb5829dd13adb0367ab3a26c700;

    /// @dev https://docs.openzeppelin.com/upgrades-plugins/1.x/writing-upgradeable#initializing_the_implementation_contract
    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    /// INTIALIZERS ///

    function initialize(
        address consortium_,
        address treasury,
        address owner_
    ) external initializer {
        __ERC20_init("", "");
        __ERC20Pausable_init();

        __Ownable_init(owner_);
        __Ownable2Step_init();
        __ERC20Permit_init("Lombard Staked Bitcoin"); // TODO: set new name

        __ReentrancyGuard_init();

        __StakedLBTC_init(
            "Lombard Staked Bitcoin", // TODO: set new name
            "stLBTC", // TODO: set new symbol
            consortium_,
            treasury
        );
    }

    function reinitialize() external reinitializer(2) onlyOwner {}

    /// MODIFIER ///
    /**
     * PAUSE
     */
    modifier onlyPauser() {
        if (pauser() != _msgSender()) {
            revert UnauthorizedAccount(_msgSender());
        }
        _;
    }

    modifier onlyMinter() {
        if (!_getStakedLBTCStorage().minters[_msgSender()]) {
            revert UnauthorizedAccount(_msgSender());
        }
        _;
    }

    modifier onlyClaimer() {
        if (!_getStakedLBTCStorage().claimers[_msgSender()]) {
            revert UnauthorizedAccount(_msgSender());
        }
        _;
    }

    /// ONLY OWNER FUNCTIONS ///

    function toggleRedeemsForBtc() external onlyOwner {
        _getStakedLBTCStorage().assetRouter.toggleRedeem();
    }

    function changeNameAndSymbol(
        string calldata name_,
        string calldata symbol_
    ) external onlyOwner {
        _changeNameAndSymbol(name_, symbol_);
    }

    function changeConsortium(address newVal) external onlyOwner {
        _changeConsortium(newVal);
    }

    function changeTreasuryAddress(address newValue) external onlyOwner {
        _changeTreasury(newValue);
    }

    function pause() external onlyPauser {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    function addMinter(address newMinter) external onlyOwner {
        _updateMinter(newMinter, true);
    }

    function removeMinter(address oldMinter) external onlyOwner {
        _updateMinter(oldMinter, false);
    }

    function addClaimer(address newClaimer) external onlyOwner {
        _updateClaimer(newClaimer, true);
    }

    function removeClaimer(address oldClaimer) external onlyOwner {
        _updateClaimer(oldClaimer, false);
    }

    function changeAssetRouter(address newVal) external onlyOwner {
        _changeAssetRouter(newVal);
    }

    function changeRedeemFee(uint256 newVal) external onlyOwner {
        _changeRedeemFee(newVal);
    }

    function changeRedeemForBtcMinAmount(uint256 newVal) external onlyOwner {
        _changeRedeemForBtcMinAmount(newVal);
    }

    /**
     * Change the address of the Bascule drawbridge contract.
     * Setting the address to 0 disables the Bascule check.
     * @param newVal The new address.
     *
     * Emits a {BasculeChanged} event.
     */
    function changeBascule(address newVal) external onlyOwner {
        _changeBascule(newVal);
    }

    function changePauser(address newPauser) external onlyOwner {
        _changePauser(newPauser);
    }

    function changeOperator(address newOperator) external onlyOwner {
        _changeOperator(newOperator);
    }

    /// GETTERS ///

    /// @notice Calculate the amount that will be unstaked and check if it's above the dust limit
    /// @dev This function can be used by front-ends to verify burn amounts before submitting a transaction
    /// @param scriptPubkey The Bitcoin script public key as a byte array
    /// @param amount The amount of LBTC to be burned
    /// @return amountAfterFee The amount that will be unstaked (after deducting the burn commission)
    /// @return isAboveDust Whether the amountAfterFee is equal to or above the dust limit
    function calcUnstakeRequestAmount(
        bytes calldata scriptPubkey,
        uint256 amount
    ) external view returns (uint256 amountAfterFee, bool isAboveDust) {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        return
            $.assetRouter.calcUnstakeRequestAmount(
                address(this),
                scriptPubkey,
                amount
            );
    }

    function consortium() external view virtual returns (INotaryConsortium) {
        return _getStakedLBTCStorage().consortium;
    }

    function getAssetRouter() external view override returns (address) {
        return address(_getStakedLBTCStorage().assetRouter);
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     *
     * Because LBTC repsents BTC we use the same decimals.
     *
     */
    function decimals() public view virtual override returns (uint8) {
        return 8;
    }

    function getTreasury() public view override returns (address) {
        return _getStakedLBTCStorage().treasury;
    }

    function toNativeCommission() public view returns (uint64) {
        return
            _getStakedLBTCStorage().assetRouter.toNativeCommission(
                address(this)
            );
    }

    function getRedeemFee() public view returns (uint256) {
        (uint256 redeemFee, , ) = _getStakedLBTCStorage()
            .assetRouter
            .tokenConfig(address(this));
        return redeemFee;
    }

    function getRedeemForBtcMinAmount() public view returns (uint256) {
        (, uint256 redeemForBtcMinAmount, ) = _getStakedLBTCStorage()
            .assetRouter
            .tokenConfig(address(this));
        return redeemForBtcMinAmount;
    }

    /**
     * Get Bascule contract.
     */
    function Bascule() external view returns (IBascule) {
        return _getStakedLBTCStorage().bascule;
    }

    function pauser() public view returns (address) {
        return _getStakedLBTCStorage().pauser;
    }

    function operator() external view returns (address) {
        return _getStakedLBTCStorage().operator;
    }

    function isMinter(address minter) external view returns (bool) {
        return _getStakedLBTCStorage().minters[minter];
    }

    function isClaimer(address claimer) external view returns (bool) {
        return _getStakedLBTCStorage().claimers[claimer];
    }

    function isNative() public pure returns (bool) {
        return false;
    }

    function isRedeemsEnabled() public view override returns (bool) {
        (, , bool isRedeemEnabled) = _getStakedLBTCStorage()
            .assetRouter
            .tokenConfig(address(this));
        return isRedeemEnabled;
    }

    function ratio() external view override returns (uint256) {
        return _getStakedLBTCStorage().assetRouter.ratio(address(this));
    }

    function getRate() external view override returns (uint256) {
        return _getStakedLBTCStorage().assetRouter.getRate(address(this));
    }

    /// USER ACTIONS ///

    /**
     * @notice Mint LBTC to the specified address
     * @param to The address to mint to
     * @param amount The amount of LBTC to mint
     * @dev Only callable by whitelisted minters
     */
    function mint(address to, uint256 amount) external override onlyMinter {
        _mint(to, amount);
    }

    /**
     * @notice Mint LBTC in batches
     * @param to The addresses to mint to
     * @param amount The amounts of LBTC to mint
     * @dev Only callable by whitelisted minters
     */
    function batchMint(
        address[] calldata to,
        uint256[] calldata amount
    ) external onlyMinter {
        _batchMint(to, amount);
    }

    /**
     * @notice Mint StakedLBTC by proving a stake action happened
     * @param rawPayload The message with the stake data
     * @param proof Signature of the consortium approving the mint
     */
    function mint(
        bytes calldata rawPayload,
        bytes calldata proof
    ) external nonReentrant returns (address recipient) {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        return $.assetRouter.mint(rawPayload, proof);
    }

    /**
     * @notice Mint StakedLBTC in batches by DepositV1 payloads
     * @param payload The messages with the stake data
     * @param proof Signatures of the consortium approving the mints
     */
    function batchMint(
        bytes[] calldata payload,
        bytes[] calldata proof
    ) external nonReentrant {
        if (paused()) {
            revert EnforcedPause();
        }
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.batchMint(payload, proof);
    }

    /**
     * @notice Mint LBTC applying a commission to the amount
     * @dev Payload should be same as mint to avoid reusing them with and without fee
     * @param mintPayload The message with the stake data
     * @param proof Signature of the consortium approving the mint
     * @param feePayload Contents of the fee approval signed by the user
     * @param userSignature Signature of the user to allow Fee
     */
    function mintWithFee(
        bytes calldata mintPayload,
        bytes calldata proof,
        bytes calldata feePayload,
        bytes calldata userSignature
    ) external onlyClaimer {
        _mintWithFee(mintPayload, proof, feePayload, userSignature);
    }

    /**
     * @notice Mint Staked LBTC in batches proving stake actions happened
     * @param mintPayload DepositV1 payloads
     * @param proof Signatures of the consortium approving the mints
     * @param feePayload Contents of the fee approvals signed by the user
     * @param userSignature Signatures of the user to allow Fees
     */
    function batchMintWithFee(
        bytes[] calldata mintPayload,
        bytes[] calldata proof,
        bytes[] calldata feePayload,
        bytes[] calldata userSignature
    ) external onlyClaimer {
        if (paused()) {
            revert EnforcedPause();
        }
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.batchMintWithFee(
            mintPayload,
            proof,
            feePayload,
            userSignature
        );
    }

    /**
     * @dev Burns StakedLBTC to initiate withdrawal of BTC to provided `scriptPubkey` with `amount`
     *
     * @param scriptPubkey scriptPubkey for output
     * @param amount Amount of StakedLBTC to burn
     */
    function redeemForBtc(
        bytes calldata scriptPubkey,
        uint256 amount
    ) external {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.redeemForBtc(
            address(_msgSender()),
            address(this),
            scriptPubkey,
            amount
        );
    }

    /**
     * @dev Burns LBTC
     *
     * @param amount Amount of LBTC to burn
     */
    function burn(uint256 amount) external {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Allows minters to burn LBTC
     *
     * @param amount Amount of LBTC to burn
     */
    function burn(address from, uint256 amount) external override onlyMinter {
        _burn(from, amount);
    }

    function redeem(uint256 amount) external nonReentrant {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.redeem(_msgSender(), address(this), amount);
    }

    function deposit(uint256 amount) external nonReentrant {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.deposit(_msgSender(), address(this), amount);
    }

    /// PRIVATE FUNCTIONS ///

    function __StakedLBTC_init(
        string memory name_,
        string memory symbol_,
        address consortium_,
        address treasury
    ) internal onlyInitializing {
        _changeNameAndSymbol(name_, symbol_);
        _changeConsortium(consortium_);
        _changeTreasury(treasury);
    }

    function _mintWithFee(
        bytes calldata mintPayload,
        bytes calldata proof,
        bytes calldata feePayload,
        bytes calldata userSignature
    ) internal {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        if (address($.assetRouter) == address(0)) {
            revert AssetRouterNotSet();
        }
        $.assetRouter.mintWithFee(
            mintPayload,
            proof,
            feePayload,
            userSignature
        );
    }

    /// @dev not zero
    function _changeConsortium(address newVal) internal {
        Assert.zeroAddress(newVal);
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        emit ConsortiumChanged(address($.consortium), newVal);
        $.consortium = INotaryConsortium(newVal);
    }

    /// @dev Zero Address allowed to disable bascule check
    function _changeBascule(address newVal) internal {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        emit BasculeChanged(address($.bascule), newVal);
        $.bascule = IBascule(newVal);
    }

    /// @dev Not zero
    function _changePauser(address newPauser) internal {
        Assert.zeroAddress(newPauser);
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        address oldPauser = $.pauser;
        $.pauser = newPauser;
        emit PauserRoleTransferred(oldPauser, newPauser);
    }

    /// @dev Not zero
    function _changeOperator(address newOperator) internal {
        Assert.zeroAddress(newOperator);
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        address oldOperator = $.operator;
        $.operator = newOperator;
        emit OperatorRoleTransferred(oldOperator, newOperator);
    }

    /// @dev `minter` not zero
    function _updateMinter(address minter, bool _isMinter) internal {
        Assert.zeroAddress(minter);
        _getStakedLBTCStorage().minters[minter] = _isMinter;
        emit MinterUpdated(minter, _isMinter);
    }

    /// @dev `claimer` not zero
    function _updateClaimer(address claimer, bool _isClaimer) internal {
        Assert.zeroAddress(claimer);
        _getStakedLBTCStorage().claimers[claimer] = _isClaimer;
        emit ClaimerUpdated(claimer, _isClaimer);
    }

    /// @dev `treasury` not zero
    function _changeTreasury(address newValue) internal {
        Assert.zeroAddress(newValue);
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        address prevValue = $.treasury;
        $.treasury = newValue;
        emit TreasuryAddressChanged(prevValue, newValue);
    }

    /// @dev allow zero address to disable Stakings
    function _changeAssetRouter(address newVal) internal {
        StakedLBTCStorage storage $ = _getStakedLBTCStorage();
        address prevValue = address($.assetRouter);
        $.assetRouter = IAssetRouter(newVal);
        emit AssetRouterChanged(prevValue, newVal);
    }

    function _changeRedeemFee(uint256 newVal) internal {
        _getStakedLBTCStorage().assetRouter.changeRedeemFee(newVal);
    }

    function _changeRedeemForBtcMinAmount(uint256 newVal) internal {
        _getStakedLBTCStorage().assetRouter.changeRedeemForBtcMinAmount(newVal);
    }

    function _getStakedLBTCStorage()
        private
        pure
        returns (StakedLBTCStorage storage $)
    {
        assembly {
            $.slot := STAKED_LBTC_STORAGE_LOCATION
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {OwnableUpgradeable} from "./OwnableUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable2Step
    struct Ownable2StepStorage {
        address _pendingOwner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable2Step")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant Ownable2StepStorageLocation = 0x237e158222e3e6968b72b9db0d8043aacf074ad9f650f0d1606b4d82ee432c00;

    function _getOwnable2StepStorage() private pure returns (Ownable2StepStorage storage $) {
        assembly {
            $.slot := Ownable2StepStorageLocation
        }
    }

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    function __Ownable2Step_init() internal onlyInitializing {
    }

    function __Ownable2Step_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        return $._pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        $._pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        delete $._pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Pausable.sol)

pragma solidity ^0.8.20;

import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {PausableUpgradeable} from "../../../utils/PausableUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract pause mechanism of the contract unreachable, and thus unusable.
 */
abstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {
    function __ERC20Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __ERC20Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {ERC20-_update}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _update(address from, address to, uint256 value) internal virtual override whenNotPaused {
        super._update(from, to, value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import {EIP712Upgradeable} from "../../../utils/cryptography/EIP712Upgradeable.sol";
import {NoncesUpgradeable} from "../../../utils/NoncesUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    function __ERC20Permit_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }

    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;

        string _name;
        string _version;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }

    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;

        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");

        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }

    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }

    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract NoncesUpgradeable is Initializable {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces
    struct NoncesStorage {
        mapping(address account => uint256) _nonces;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Nonces")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;

    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {
        assembly {
            $.slot := NoncesStorageLocation
        }
    }

    function __Nonces_init() internal onlyInitializing {
    }

    function __Nonces_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        return $._nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return $._nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Pausable
    struct PausableStorage {
        bool _paused;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Pausable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;

    function _getPausableStorage() private pure returns (PausableStorage storage $) {
        assembly {
            $.slot := PausableStorageLocation
        }
    }

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        PausableStorage storage $ = _getPausableStorage();
        return $._paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    /// @custom:storage-location erc7201:openzeppelin.storage.ReentrancyGuard
    struct ReentrancyGuardStorage {
        uint256 _status;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ReentrancyGuardStorageLocation = 0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;

    function _getReentrancyGuardStorage() private pure returns (ReentrancyGuardStorage storage $) {
        assembly {
            $.slot := ReentrancyGuardStorageLocation
        }
    }

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if ($._status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        $._status = ENTERED;
    }

    function _nonReentrantAfter() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        return $._status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// Compatible with OpenZeppelin Contracts ^5.0.0
pragma solidity 0.8.24;

/// Interface of the Bascule contract as used by on-chain contracts.
/// @custom:security-contact [email protected]
interface IBascule {
    /**
     * Event emitted when a withdrawal is validated.
     * @param withdrawalAmount Amount of the withdrawal.
     * @param depositID Unique identifier for a deposit that took place on another chain and was withdrawn on this chain.
     */
    event WithdrawalValidated(bytes32 depositID, uint256 withdrawalAmount);

    /**
     * Error on attempt to withdraw an already withdrawn deposit.
     * @param depositID Unique identifier for deposit that failed validation.
     * @param withdrawalAmount Amount of the withdrawal.
     */
    error AlreadyWithdrawn(bytes32 depositID, uint256 withdrawalAmount);

    /**
     * Error when a withdrawal fails validation.
     * This means the corresponding deposit is not in the map.
     * @param depositID Unique identifier for deposit that failed validation.
     * @param withdrawalAmount Amount of the withdrawal.
     */
    error WithdrawalFailedValidation(
        bytes32 depositID,
        uint256 withdrawalAmount
    );

    /**
     * Validate a withdrawal (before executing it) if the amount is above
     * threshold.
     *
     * This function checks if our accounting has recorded a deposit that
     * corresponds to this withdrawal request. A deposit can only be withdrawn
     * once.
     *
     * @param depositID Unique identifier of the deposit on another chain.
     * @param withdrawalAmount Amount of the withdrawal.
     *
     * Emits {WithdrawalValidated}.
     */
    function validateWithdrawal(
        bytes32 depositID,
        uint256 withdrawalAmount
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";

interface INotaryConsortium {
    /// @dev Error thrown when signature payload is already used
    error PayloadAlreadyUsed();

    /// @dev Error thrown when signatures length is not equal to signers length
    error LengthMismatch();

    /// @dev Error thrown when there are not enough signatures
    error NotEnoughSignatures();

    /// @dev Error thrown when unexpected action is used
    error UnexpectedAction(bytes4 action);

    /// @dev Event emitted when the validator set is updated
    event ValidatorSetUpdated(
        uint256 indexed epoch,
        address[] validators,
        uint256[] weights,
        uint256 threshold
    );

    /// @dev Error thrown when validator set already set
    error ValSetAlreadySet();

    /// @dev Error thrown when no validator set is set
    error NoValidatorSet();

    /// @dev Error thrown when invalid epoch is provided
    error InvalidEpoch();

    function checkProof(
        bytes32 _payloadHash,
        bytes calldata _proof
    ) external view;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

interface IMailbox {
    error Mailbox_ZeroChainId();
    error Mailbox_ZeroConsortium();
    error Mailbox_ZeroMailbox();
    error Mailbox_ZeroRecipient();
    error Mailbox_ZeroAmount();
    error Mailbox_MessagePathEnabled(bytes32 id);
    error Mailbox_MessagePathDisabled(bytes32 id);
    error Mailbox_UnexpectedDestinationCaller(address expected, address actual);
    error Mailbox_HandlerNotImplemented();
    error Mailbox_PayloadOversize(uint32 max, uint256 actual);
    error Mailbox_NotEnoughFee(uint256 expected, uint256 actual);
    error Mailbox_CallFailed();

    event MessagePathEnabled(
        bytes32 indexed destinationChain,
        bytes32 indexed inboundMessagePath,
        bytes32 indexed outboundMessagePath,
        bytes32 destinationMailbox
    );

    event MessagePathDisabled(
        bytes32 indexed destinationChain,
        bytes32 indexed inboundMessagePath,
        bytes32 indexed outboundMessagePath,
        bytes32 destinationMailbox
    );

    event MessageSent(
        bytes32 indexed destinationLChainId,
        address indexed msgSender,
        bytes32 indexed recipient,
        bytes payload
    );

    /// Message payment receipt
    event MessagePaid(
        bytes32 indexed payloadHash,
        address indexed msgSender,
        uint256 payloadSize,
        uint256 value
    );

    event MessageDelivered(
        bytes32 indexed payloadHash,
        address indexed caller,
        uint256 indexed nonce,
        bytes32 msgSender,
        bytes payload
    );

    event MessageHandled(
        bytes32 indexed payloadHash,
        address indexed destinationCaller,
        bytes executionResult
    );

    event MessageHandleError(
        bytes32 indexed payloadHash,
        address indexed destinationCaller,
        string reason,
        bytes customError
    );

    event SenderConfigUpdated(
        address indexed sender,
        uint64 maxPayloadSize,
        bool feeDisabled
    );

    event DefaultPayloadSizeSet(uint64 maxPayloadSize);

    event FeePerByteSet(uint256 fee);

    event FeeWithdrawn(address indexed treasury, uint256 amount);

    function getFee(
        address sender,
        bytes calldata body
    ) external view returns (uint256);

    function getInboundMessagePath(
        bytes32 pathId
    ) external view returns (bytes32);

    function send(
        bytes32 destinationChain,
        bytes32 recipient,
        bytes32 destinationCaller,
        bytes calldata body
    ) external payable returns (uint256, bytes32);

    function deliverAndHandle(
        bytes calldata rawPayload,
        bytes calldata proof
    ) external returns (bytes32, bool, bytes memory);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import {ERC20PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PausableUpgradeable.sol";
import {ERC20PermitUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import {ReentrancyGuardUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {EIP1271SignatureUtils} from "../libs/EIP1271SignatureUtils.sol";
import {IBaseLBTC} from "./interfaces/IBaseLBTC.sol";
import {Assert} from "./libraries/Assert.sol";
import {Actions} from "../libs/Actions.sol";

/**
 * @title Abstract bridge adapter
 * @author Lombard.finance
 * @notice Implements basic communication with Bridge contract.
 * Should be extended with business logic of bridging protocols (e.g. CCIP, LayerZero).
 */
abstract contract BaseLBTC is
    IBaseLBTC,
    ERC20PausableUpgradeable,
    ERC20PermitUpgradeable,
    ReentrancyGuardUpgradeable
{
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation =
        0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation =
        0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function getFeeDigest(
        uint256 fee,
        uint256 expiry
    ) external view virtual returns (bytes32) {
        return
            _hashTypedDataV4(
                keccak256(
                    abi.encode(
                        Actions.FEE_APPROVAL_EIP712_ACTION,
                        block.chainid,
                        fee,
                        expiry
                    )
                )
            );
    }

    function _batchMint(
        address[] calldata to,
        uint256[] calldata amount
    ) internal {
        Assert.equalLength(to.length, amount.length);

        for (uint256 i; i < to.length; ++i) {
            _mint(to[i], amount[i]);
        }
    }

    function _changeNameAndSymbol(
        string memory name_,
        string memory symbol_
    ) internal {
        ERC20Storage storage $ = _getERC20Storage_();
        $._name = name_;
        $._symbol = symbol_;
        EIP712Storage storage $_ = _getEIP712Storage_();
        $_._name = name_;
        emit NameAndSymbolChanged(name_, symbol_);
    }

    function _getERC20Storage_() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    function _getEIP712Storage_()
        private
        pure
        returns (EIP712Storage storage $)
    {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Override of the _update function to satisfy both ERC20Upgradeable and ERC20PausableUpgradeable
     */
    function _update(
        address from,
        address to,
        uint256 value
    ) internal virtual override(ERC20Upgradeable, ERC20PausableUpgradeable) {
        super._update(from, to, value);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IBascule} from "../../bascule/interfaces/IBascule.sol";
import {IMailbox} from "../../gmp/IMailbox.sol";
import {IOracle} from "../interfaces/IOracle.sol";

interface IAssetRouter {
    // Describes types of possible routes. UNKNOWN means no route or disabled route
    enum RouteType {
        UNKNOWN, // unknown must be '0'
        DEPOSIT,
        REDEEM
    }

    error AssetRouter_ZeroMailbox();
    error AssetRouter_MailboxExpected();
    error AssetRouter_PayloadAlreadyUsed();
    error AssetRouter_ZeroAddress();
    error AssetRouter_Unauthorized();
    error AssetRouter_WrongOperation();
    error AssetRouter_WrongSender();
    error AssetRouter_WrongNativeToken();
    error AssetRouter_MintProcessingError();
    error AssetRouter_FeeGreaterThanAmount();
    error AssertRouter_UnauthorizedAccount();
    error AssertRouter_WrongRedeemDestinationChain();
    error AssertRouter_WrongRouteType();
    error AssertRouter_WrongToken();

    event AssetRouter_FeeCharged(uint256 indexed fee, bytes userSignature);
    event AssetRouter_RedeemFeeChanged(
        address indexed token,
        uint256 oldFee,
        uint256 newFee
    );
    event AssetRouter_RedeemForBtcMinAmountChanged(
        address indexed token,
        uint256 oldMinAmount,
        uint256 newMinAmount
    );
    event AssetRouter_RedeemEnabled(address indexed token, bool enabled);

    event AssetRouter_RouteSet(
        bytes32 indexed fromToken,
        bytes32 indexed fromChainId,
        bytes32 indexed toToken,
        bytes32 toChainId,
        RouteType routeType
    );

    event AssetRouter_RouteRemoved(
        bytes32 indexed fromToken,
        bytes32 indexed fromChainId,
        bytes32 indexed toToken,
        bytes32 toChainId
    );
    event AssetRouter_BasculeChanged(
        address indexed prevVal,
        address indexed newVal
    );
    event AssetRouter_OracleChanged(
        address indexed prevVal,
        address indexed newVal
    );
    event AssetRouter_MailboxChanged(
        address indexed prevVal,
        address indexed newVal
    );
    event AssetRouter_MintFeeChanged(
        uint256 indexed oldFee,
        uint256 indexed newFee
    );
    event AssetRouter_ToNativeCommissionChanged(
        uint256 indexed oldCommission,
        uint256 indexed newCommission
    );
    event AssetRouter_NativeTokenChanged(
        address indexed oldAddress,
        address indexed newAddress
    );
    event AssetRouter_BatchMintError(
        bytes32 indexed payloadHash,
        string reason,
        bytes customError
    );
    event AssetRouter_DustFeeRateChanged(
        uint256 indexed oldRate,
        uint256 indexed newRate
    );

    function getRouteType(
        bytes32 fromToken,
        bytes32 fromChainId,
        bytes32 toChainId,
        bytes32 toToken
    ) external view returns (RouteType);

    function maxMintCommission(address token) external view returns (uint256);
    function ratio(address token) external view returns (uint256);
    function getRate(address token) external view returns (uint256);
    function bitcoinChainId() external view returns (bytes32);
    function bascule() external view returns (IBascule);
    function oracle(address token) external view returns (IOracle);
    function mailbox() external view returns (IMailbox);
    function toNativeCommission(address token) external view returns (uint64);
    function nativeToken() external view returns (address);
    function tokenConfig(
        address token
    )
        external
        view
        returns (
            uint256 redeemFee,
            uint256 redeemForBtcMinAmount,
            bool isRedeemEnabled
        );

    function deposit(
        bytes32 tolChainId,
        bytes32 toToken,
        bytes32 recipient,
        uint256 amount
    ) external;

    function deposit(
        address fromAddress,
        address toToken,
        uint256 amount
    ) external;

    function redeemForBtc(
        address fromAddress,
        address fromToken,
        bytes calldata recipient,
        uint256 amount
    ) external;

    function redeem(
        address fromAddress,
        bytes32 tolChainId,
        address fromToken,
        bytes32 toToken,
        bytes32 recipient,
        uint256 amount
    ) external;

    function redeem(
        address fromAddress,
        address fromToken,
        uint256 amount
    ) external;

    function mint(
        bytes calldata rawPayload,
        bytes calldata proof
    ) external returns (address);

    function mintWithFee(
        bytes calldata mintPayload,
        bytes calldata proof,
        bytes calldata feePayload,
        bytes calldata userSignature
    ) external;

    function batchMint(
        bytes[] calldata payload,
        bytes[] calldata proof
    ) external;

    function batchMintWithFee(
        bytes[] calldata mintPayload,
        bytes[] calldata proof,
        bytes[] calldata feePayload,
        bytes[] calldata userSignature
    ) external;

    function calcUnstakeRequestAmount(
        address token,
        bytes calldata scriptPubkey,
        uint256 amount
    ) external view returns (uint256 amountAfterFee, bool isAboveDust);

    function changeRedeemFee(uint256 fee) external;

    function changeRedeemForBtcMinAmount(uint256 minAmount) external;

    function toggleRedeem() external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

interface IBaseLBTC {
    error RedeemForBtcDisabled();
    error PayloadAlreadyUsed();
    error InvalidMintAmount();
    error AssetRouterNotSet();

    event RedeemRequest(
        address indexed from,
        uint256 indexed nonce,
        uint256 amount,
        uint256 fee,
        bytes payload
    );
    event RedeemsForBtcEnabled(bool);
    event NameAndSymbolChanged(string name, string symbol);
    event ConsortiumChanged(address indexed prevVal, address indexed newVal);
    event TreasuryAddressChanged(
        address indexed prevValue,
        address indexed newValue
    );
    event BurnCommissionChanged(
        uint64 indexed prevValue,
        uint64 indexed newValue
    );
    event DustFeeRateChanged(uint256 indexed oldRate, uint256 indexed newRate);
    event BasculeChanged(address indexed prevVal, address indexed newVal);
    event FeeCharged(uint256 indexed fee, bytes userSignature);
    event FeeChanged(uint256 indexed oldFee, uint256 indexed newFee);
    event RedeemFeeChanged(uint256 indexed oldFee, uint256 indexed newFee);

    event MintProofConsumed(
        address indexed recipient,
        bytes32 indexed payloadHash,
        bytes payload
    );

    event BatchMintSkipped(bytes32 indexed payloadHash, bytes payload);
    event AssetRouterChanged(address indexed newVal, address indexed prevVal);

    function burn(uint256 amount) external;
    function burn(address from, uint256 amount) external;
    function mint(address to, uint256 amount) external;
    function getTreasury() external view returns (address);
    function getAssetRouter() external view returns (address);
    function isNative() external view returns (bool);
    function getRedeemFee() external view returns (uint256);
    function getFeeDigest(
        uint256 fee,
        uint256 expiry
    ) external view returns (bytes32);
    function isRedeemsEnabled() external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

interface IOracle {
    event Oracle_RatioChanged(
        uint256 prevVal,
        uint256 newVal,
        uint256 switchTime
    );

    function ratio() external view returns (uint256);
    function getRate() external view returns (uint256);
    function token() external view returns (address);
    function denomHash() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IBaseLBTC} from "./IBaseLBTC.sol";

interface IStakedLBTC is IBaseLBTC {
    error UnauthorizedAccount(address account);

    event OperatorRoleTransferred(
        address indexed previousOperator,
        address indexed newOperator
    );
    event ClaimerUpdated(address indexed claimer, bool isClaimer);
    event PauserRoleTransferred(
        address indexed previousPauser,
        address indexed newPauser
    );
    event MinterUpdated(address indexed minter, bool isMinter);

    function mint(
        bytes calldata payload,
        bytes calldata proof
    ) external returns (address);
    function ratio() external view returns (uint256);
    function getRate() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {EIP1271SignatureUtils} from "../../libs/EIP1271SignatureUtils.sol";

/// @dev collection of assertions used in ERC20 contracts
library Assert {
    error InvalidDustFeeRate();
    error NonEqualLength(uint256 a, uint256 b);
    error InvalidAction(bytes4 expected, bytes4 actual);
    error InvalidFeeApprovalSignature();

    error ZeroAddress();

    function zeroAddress(address addr) internal pure {
        if (addr == address(0)) revert ZeroAddress();
    }

    function dustFeeRate(uint256 rate) internal pure {
        if (rate == 0) revert InvalidDustFeeRate();
    }

    function equalLength(uint256 lengthA, uint256 lengthB) internal pure {
        if (lengthA != lengthB) revert NonEqualLength(lengthA, lengthB);
    }

    function selector(
        bytes calldata payload,
        bytes4 expectedAction
    ) internal pure {
        if (bytes4(payload) != expectedAction)
            revert InvalidAction(expectedAction, bytes4(payload));
    }

    function feeApproval(
        bytes32 digest,
        address recipient,
        bytes calldata signature
    ) internal view {
        if (
            !EIP1271SignatureUtils.checkSignature(recipient, digest, signature)
        ) {
            revert InvalidFeeApprovalSignature();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

library Redeem {
    // bytes4(keccak256("payload(uint256,uint256,bytes32,bytes)")
    bytes4 internal constant REQUEST_SELECTOR = 0xf86c9e7b;

    function encodeRequest(
        uint256 amount,
        uint256 nonce,
        bytes calldata script
    ) internal view returns (bytes memory) {
        // amount and script already checked during fee calculation
        return
            abi.encodeWithSelector(
                REQUEST_SELECTOR,
                amount,
                nonce,
                bytes32(block.chainid),
                script
            );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {BitcoinUtils} from "../../libs/BitcoinUtils.sol";

/// @dev collection of validations used in ERC20 contracts
library Validation {
    error AmountLessThanCommission(uint256 fee);
    error AmountBelowMinLimit(uint256 dustLimit);
    error ScriptPubkeyUnsupported();

    function redeemFee(
        bytes calldata scriptPubkey,
        uint256 amount,
        uint64 fee,
        uint256 minAmount
    ) internal pure returns (uint256) {
        (
            uint256 amountAfterFee,
            bool isAboveFee,
            bool isAboveMinLimit
        ) = calcFeeAndDustLimit(scriptPubkey, amount, fee, minAmount);
        if (!isAboveFee) {
            revert AmountLessThanCommission(fee);
        }
        if (!isAboveMinLimit) {
            revert AmountBelowMinLimit(minAmount);
        }

        return amountAfterFee;
    }

    function calcFeeAndDustLimit(
        bytes calldata scriptPubkey,
        uint256 amount,
        uint64 fee,
        uint256 minAmount
    ) internal pure returns (uint256, bool, bool) {
        BitcoinUtils.OutputType outType = BitcoinUtils.getOutputType(
            scriptPubkey
        );
        if (outType == BitcoinUtils.OutputType.UNSUPPORTED) {
            revert ScriptPubkeyUnsupported();
        }

        if (amount <= fee) {
            return (0, false, false);
        }

        uint256 amountAfterFee = amount - fee;

        bool isAboveMinLimit = amountAfterFee >= minAmount;
        return (amountAfterFee, true, isAboveMinLimit);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

library Actions {
    /// @dev toChain, recipient, amount, txid are validated
    struct DepositBtcActionV0 {
        uint256 toChain;
        address recipient;
        uint256 amount;
        bytes32 txid;
        uint32 vout;
    }

    /// @dev toChain, recipient, amount, txid, token are validated
    struct DepositBtcActionV1 {
        uint256 toChain;
        address recipient;
        uint256 amount;
        bytes32 txid;
        uint32 vout;
        address token;
    }

    struct DepositBridgeAction {
        uint256 fromChain;
        bytes32 fromContract;
        uint256 toChain;
        address toContract;
        address recipient;
        uint64 amount;
        uint256 nonce;
    }

    struct ValSetAction {
        uint256 epoch;
        address[] validators;
        uint256[] weights;
        uint256 weightThreshold;
        uint256 height;
    }

    struct FeeApprovalAction {
        uint256 fee;
        uint256 expiry;
    }

    struct RatioUpdate {
        bytes32 denom;
        uint256 ratio;
        uint256 switchTime;
    }

    /// @dev Error thrown when invalid public key is provided
    error InvalidPublicKey(bytes pubKey);

    /// @dev Error thrown when signatures length is not equal to signers length
    error Actions_LengthMismatch();

    /// @dev Error thrown when threshold is invalid
    error InvalidThreshold();

    /// @dev Error thrown when validator set size is invalid
    error InvalidValidatorSetSize();

    /// @dev Error thrown when zero validator is provided
    error ZeroValidator();

    /// @dev Error thrown when wrong chain id is provided
    error WrongChainId();

    /// @dev Error thrown when wrong contract is provided
    error WrongContract();

    /// @dev Error thrown when zero address is provided
    error Actions_ZeroAddress();

    /// @dev Error thrown when zero amount is provided
    error ZeroAmount();

    /// @dev Error thrown when zero weight is provided
    error ZeroWeight();

    /// @dev Error thrown when fee approval is expired
    error UserSignatureExpired(uint256 expiry);

    /// @dev Error thrown when amount is below fee
    error NotEnoughAmountToUseApproval();

    /// @dev Error thrown when zero fee is used
    error ZeroFee();

    /// @dev Error thrown when payload length is too big
    error InvalidPayloadSize(uint256 expected, uint256 actual);

    error ZeroTxId();

    error InvalidDestinationToken(address expected, address actual);

    error Actions_ZeroDenom();

    error Actions_ZeroRatio();

    // bytes4(keccak256("feeApproval(uint256,uint256)"))
    bytes4 internal constant FEE_APPROVAL_ACTION = 0x8175ca94;
    // keccak256("feeApproval(uint256 chainId,uint256 fee,uint256 expiry)")
    bytes32 internal constant FEE_APPROVAL_EIP712_ACTION =
        0x40ac9f6aa27075e64c1ed1ea2e831b20b8c25efdeb6b79fd0cf683c9a9c50725;
    // bytes4(keccak256("payload(bytes32,bytes32,uint64,bytes32,uint32)"))
    bytes4 internal constant DEPOSIT_BTC_ACTION_V0 = 0xf2e73f7c;
    // bytes4(keccak256("payload(bytes32,bytes32,uint64,bytes32,uint32,bytes32)"))
    bytes4 internal constant DEPOSIT_BTC_ACTION_V1 = 0xce25e7c2;
    // bytes4(keccak256("payload(bytes32,bytes32,bytes32,bytes32,bytes32,uint64,uint256)"))
    bytes4 internal constant DEPOSIT_BRIDGE_ACTION = 0x5c70a505;
    // bytes4(keccak256("payload(uint256,bytes[],uint256[],uint256,uint256)"))
    bytes4 internal constant NEW_VALSET = 0x4aab1d6f;
    // bytes4(keccak256("payload(bytes32,uint256,uint256)"))
    bytes4 internal constant RATIO_UPDATE = 0x6c722c2c;

    /// @dev Maximum number of validators allowed in the consortium.
    /// @notice This value is determined by the minimum of CometBFT consensus limitations and gas considerations:
    /// - CometBFT has a hard limit of 10,000 validators (https://docs.cometbft.com/v0.38/spec/core/state)
    /// - Gas-based calculation:
    ///   - Assumes 4281 gas per ECDSA signature verification
    ///   - Uses a conservative 30 million gas block limit
    ///   - Maximum possible signatures: 30,000,000 / 4,281 ≈ 7007
    ///   - Reverse calculated for BFT consensus (2/3 + 1):
    ///     7,007 = (10,509 * 2/3 + 1) rounded down
    /// - The lower value of 10,000 (CometBFT limit) and 10,509 (gas calculation) is chosen
    /// @dev This limit ensures compatibility with CometBFT while also considering gas limitations
    ///      for signature verification within a single block.
    uint256 private constant MAX_VALIDATOR_SET_SIZE = 102;

    /// @dev Minimum number of validators allowed in the system.
    /// @notice While set to 1 to allow for non-distributed scenarios, this configuration
    /// does not provide Byzantine fault tolerance. For a truly distributed and
    /// fault-tolerant system, a minimum of 4 validators would be recommended to tolerate
    /// at least one Byzantine fault.
    uint256 private constant MIN_VALIDATOR_SET_SIZE = 1;

    /// @dev A constant representing the number of bytes for a slot of information in a payload.
    uint256 internal constant ABI_SLOT_SIZE = 32;

    /**
     * @notice Returns decoded deposit btc msg v0
     * @dev Message should not contain the selector
     * @param payload Body of the mint payload
     */
    function depositBtcV0(
        bytes memory payload
    ) internal view returns (DepositBtcActionV0 memory) {
        if (payload.length != ABI_SLOT_SIZE * 5)
            revert InvalidPayloadSize(ABI_SLOT_SIZE * 5, payload.length);

        (
            uint256 toChain,
            address recipient,
            uint256 amount,
            bytes32 txid,
            uint32 vout
        ) = abi.decode(payload, (uint256, address, uint256, bytes32, uint32));

        if (toChain != block.chainid) {
            revert WrongChainId();
        }
        if (recipient == address(0)) {
            revert Actions_ZeroAddress();
        }
        if (amount == 0) {
            revert ZeroAmount();
        }
        if (txid == bytes32(0)) {
            revert ZeroTxId();
        }

        return DepositBtcActionV0(toChain, recipient, amount, txid, vout);
    }

    /**
     * @notice Returns decoded deposit btc msg v1
     * @dev Message should not contain the selector
     * @param payload Body of the mint payload
     */
    function depositBtcV1(
        bytes memory payload
    ) internal view returns (DepositBtcActionV1 memory) {
        if (payload.length != ABI_SLOT_SIZE * 6)
            revert InvalidPayloadSize(ABI_SLOT_SIZE * 6, payload.length);

        (
            uint256 toChain,
            address recipient,
            uint256 amount,
            bytes32 txid,
            uint32 vout,
            address token
        ) = abi.decode(
                payload,
                (uint256, address, uint256, bytes32, uint32, address)
            );

        if (toChain != block.chainid) {
            revert WrongChainId();
        }
        if (recipient == address(0)) {
            revert Actions_ZeroAddress();
        }
        if (amount == 0) {
            revert ZeroAmount();
        }
        if (txid == bytes32(0)) {
            revert ZeroTxId();
        }
        if (token != address(this)) {
            revert InvalidDestinationToken(address(this), token);
        }

        return
            DepositBtcActionV1(toChain, recipient, amount, txid, vout, token);
    }

    /**
     * @notice Returns decoded bridge payload
     * @dev Payload should not contain the selector
     * @param payload Body of the burn payload
     */
    function depositBridge(
        bytes memory payload
    ) internal view returns (DepositBridgeAction memory) {
        if (payload.length != ABI_SLOT_SIZE * 7)
            revert InvalidPayloadSize(ABI_SLOT_SIZE * 7, payload.length);

        (
            uint256 fromChain,
            bytes32 fromContract,
            uint256 toChain,
            address toContract,
            address recipient,
            uint64 amount,
            uint256 nonce
        ) = abi.decode(
                payload,
                (uint256, bytes32, uint256, address, address, uint64, uint256)
            );

        if (toChain != block.chainid) {
            revert WrongChainId();
        }
        if (recipient == address(0)) {
            revert Actions_ZeroAddress();
        }
        if (amount == 0) {
            revert ZeroAmount();
        }

        return
            DepositBridgeAction(
                fromChain,
                fromContract,
                toChain,
                toContract,
                recipient,
                amount,
                nonce
            );
    }

    /**
     * @notice Returns decoded validator set
     * @dev Payload should not contain the selector
     * @param payload Body of the set validators set payload
     */
    function validateValSet(
        bytes memory payload
    ) internal pure returns (ValSetAction memory) {
        (
            uint256 epoch,
            bytes[] memory pubKeys,
            uint256[] memory weights,
            uint256 weightThreshold,
            uint256 height
        ) = abi.decode(
                payload,
                (uint256, bytes[], uint256[], uint256, uint256)
            );

        // Since dynamic arrays can variably insert more slots of data for things such as data length,
        // offset etc., we will just encode the received variables again and check for a length match.
        bytes memory reEncodedPayload = abi.encode(
            epoch,
            pubKeys,
            weights,
            weightThreshold,
            height
        );
        if (reEncodedPayload.length != payload.length)
            revert InvalidPayloadSize(payload.length, reEncodedPayload.length);

        if (
            pubKeys.length < MIN_VALIDATOR_SET_SIZE ||
            pubKeys.length > MAX_VALIDATOR_SET_SIZE
        ) revert InvalidValidatorSetSize();

        if (pubKeys.length != weights.length) revert Actions_LengthMismatch();

        if (weightThreshold == 0) revert InvalidThreshold();

        uint256 sum = 0;
        for (uint256 i; i < weights.length; ) {
            if (weights[i] == 0) {
                revert ZeroWeight();
            }
            sum += weights[i];
            unchecked {
                ++i;
            }
        }
        if (sum < weightThreshold) revert InvalidThreshold();

        address[] memory validators = pubKeysToAddress(pubKeys);

        return
            ValSetAction(epoch, validators, weights, weightThreshold, height);
    }

    function pubKeysToAddress(
        bytes[] memory _pubKeys
    ) internal pure returns (address[] memory) {
        address[] memory addresses = new address[](_pubKeys.length);
        for (uint256 i; i < _pubKeys.length; ) {
            // each pubkey represented as uncompressed

            if (_pubKeys[i].length == 65) {
                bytes memory data = _pubKeys[i];

                // Ensure that first byte of pubkey is 0x04
                if (_pubKeys[i][0] != 0x04)
                    revert InvalidPublicKey(_pubKeys[i]);

                // create a new array with length - 1 (excluding the first 0x04 byte)
                bytes memory result = new bytes(data.length - 1);

                // use inline assembly for memory manipulation
                assembly {
                    // calculate the start of the `result` and `data` in memory
                    let resultData := add(result, 0x20) // points to the first byte of the result
                    let dataStart := add(data, 0x21) // points to the second byte of data (skip 0x04)

                    // copy 64 bytes from input (excluding the first byte) to result
                    mstore(resultData, mload(dataStart)) // copy the first 32 bytes
                    mstore(add(resultData, 0x20), mload(add(dataStart, 0x20))) // copy the next 32 bytes
                }

                addresses[i] = address(uint160(uint256(keccak256(result))));
            } else {
                revert InvalidPublicKey(_pubKeys[i]);
            }

            unchecked {
                ++i;
            }
        }
        return addresses;
    }

    /**
     * @notice Returns decoded fee approval
     * @dev Payload should not contain the selector
     * @param payload Body of the fee approval payload
     */
    function feeApproval(
        bytes memory payload
    ) internal view returns (FeeApprovalAction memory) {
        if (payload.length != ABI_SLOT_SIZE * 2)
            revert InvalidPayloadSize(ABI_SLOT_SIZE * 2, payload.length);

        (uint256 fee, uint256 expiry) = abi.decode(payload, (uint256, uint256));

        if (block.timestamp > expiry) {
            revert UserSignatureExpired(expiry);
        }
        if (fee == 0) {
            revert ZeroFee();
        }

        return FeeApprovalAction(fee, expiry);
    }

    /**
     * @notice Returns decoded ratio update message
     * @dev Message should not contain the selector
     * @param payload Body of the ratio update message
     */
    function ratioUpdate(
        bytes memory payload
    ) internal pure returns (RatioUpdate memory) {
        if (payload.length != ABI_SLOT_SIZE * 3)
            revert InvalidPayloadSize(ABI_SLOT_SIZE * 3, payload.length);

        (bytes32 denom, uint256 ratio, uint256 timestamp) = abi.decode(
            payload,
            (bytes32, uint256, uint256)
        );

        if (denom == bytes32(0)) {
            revert Actions_ZeroDenom();
        }
        if (ratio == uint256(0)) {
            revert Actions_ZeroRatio();
        }

        return RatioUpdate(denom, ratio, timestamp);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";

bytes1 constant OP_0 = 0x00;
bytes1 constant OP_1 = 0x51;
bytes1 constant OP_DATA_32 = 0x20;
bytes1 constant OP_DATA_20 = 0x14;

uint256 constant BASE_SPEND_COST = 49; // 32 (txid) + 4 (vout) + 1 (scriptSig size) + 4 (nSequence) + 8 (amount)

// Size of inputs spending different output types
uint256 constant NON_WITNESS_INPUT_SIZE = 107; // Used for non-witness outputs (P2PKH, P2SH)
uint256 constant WITNESS_INPUT_SIZE = 26; // floor(107 / 4), used for witness outputs (P2WPKH, P2WSH, P2TR)

library BitcoinUtils {
    enum OutputType {
        UNSUPPORTED,
        P2TR,
        P2WPKH,
        P2WSH
    }

    uint256 public constant DEFAULT_DUST_FEE_RATE = 3000; // Default value - 3 satoshis per byte

    function getOutputType(
        bytes calldata scriptPubkey
    ) internal pure returns (OutputType) {
        if (
            scriptPubkey.length == 22 &&
            scriptPubkey[0] == OP_0 &&
            scriptPubkey[1] == OP_DATA_20
        ) {
            return OutputType.P2WPKH;
        }

        if (
            scriptPubkey.length == 34 &&
            scriptPubkey[0] == OP_1 &&
            scriptPubkey[1] == OP_DATA_32
        ) {
            return OutputType.P2TR;
        }

        if (
            scriptPubkey.length == 34 &&
            scriptPubkey[0] == OP_0 &&
            scriptPubkey[1] == OP_DATA_32
        ) {
            return OutputType.P2WSH;
        }

        return OutputType.UNSUPPORTED;
    }

    /// @notice Compute the dust limit for a given Bitcoin script public key
    /// @dev The dust limit is the minimum payment to an address that is considered
    ///      spendable under consensus rules. This function is based on Bitcoin Core's
    ///      implementation.
    /// @param scriptPubkey The Bitcoin script public key as a byte array
    /// @param dustFeeRate The current dust fee rate (in satoshis per 1000 bytes)
    /// @return dustLimit The calculated dust limit in satoshis
    /// @custom:reference https://github.com/bitcoin/bitcoin/blob/43740f4971f45cd5499470b6a085b3ecd8b96d28/src/policy/policy.cpp#L54
    function getDustLimitForOutput(
        OutputType outType,
        bytes calldata scriptPubkey,
        uint256 dustFeeRate
    ) internal pure returns (uint256 dustLimit) {
        uint256 spendCost = BASE_SPEND_COST;

        if (
            outType == OutputType.P2TR ||
            outType == OutputType.P2WPKH ||
            outType == OutputType.P2WSH
        ) {
            // witness v0 and v1 has a cheaper payment formula
            spendCost += WITNESS_INPUT_SIZE;
            // The current addition creates a discrepancy of 1, and our final value should be 98 bytes.
            // Thus, we add 1 here.
            spendCost += 1;
        } else {
            spendCost += NON_WITNESS_INPUT_SIZE;
        }

        spendCost += scriptPubkey.length;

        // Calculate dust limit
        dustLimit = Math.ceilDiv(spendCost * dustFeeRate, 1000);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IERC1271} from "@openzeppelin/contracts/interfaces/IERC1271.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";

/**
 * @title Library of utilities for making EIP1271-compliant signature checks.
 * @author Lombard.Finance
 * @notice The contracts is a part of Lombard.Finace protocol
 */
library EIP1271SignatureUtils {
    // bytes4(keccak256("isValidSignature(bytes32,bytes)")
    bytes4 internal constant EIP1271_MAGICVALUE = 0x1626ba7e;
    bytes4 internal constant EIP1271_WRONGVALUE = 0xffffffff;

    /**
     * @notice Checks @param signature is a valid signature of @param digest from @param signer.
     * If the `signer` contains no code -- i.e. it is not (yet, at least) a contract address, then checks using standard ECDSA logic
     * Otherwise, passes on the signature to the signer to verify the signature and checks that it returns the `EIP1271_MAGICVALUE`.
     */
    function checkSignature(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        if (signer.code.length != 0) {
            if (
                IERC1271(signer).isValidSignature(digest, signature) !=
                EIP1271_MAGICVALUE
            ) {
                return false;
            }
        } else {
            if (ECDSA.recover(digest, signature) != signer) {
                return false;
            }
        }
        return true;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AssetRouterNotSet","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"InvalidMintAmount","type":"error"},{"inputs":[{"internalType":"uint256","name":"a","type":"uint256"},{"internalType":"uint256","name":"b","type":"uint256"}],"name":"NonEqualLength","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"PayloadAlreadyUsed","type":"error"},{"inputs":[],"name":"RedeemForBtcDisabled","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"UnauthorizedAccount","type":"error"},{"inputs":[],"name":"ZeroAddress","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newVal","type":"address"},{"indexed":true,"internalType":"address","name":"prevVal","type":"address"}],"name":"AssetRouterChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"prevVal","type":"address"},{"indexed":true,"internalType":"address","name":"newVal","type":"address"}],"name":"BasculeChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"payloadHash","type":"bytes32"},{"indexed":false,"internalType":"bytes","name":"payload","type":"bytes"}],"name":"BatchMintSkipped","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"prevValue","type":"uint64"},{"indexed":true,"internalType":"uint64","name":"newValue","type":"uint64"}],"name":"BurnCommissionChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"claimer","type":"address"},{"indexed":false,"internalType":"bool","name":"isClaimer","type":"bool"}],"name":"ClaimerUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"prevVal","type":"address"},{"indexed":true,"internalType":"address","name":"newVal","type":"address"}],"name":"ConsortiumChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"oldRate","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"newRate","type":"uint256"}],"name":"DustFeeRateChanged","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"oldFee","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"newFee","type":"uint256"}],"name":"FeeChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fee","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"userSignature","type":"bytes"}],"name":"FeeCharged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"bytes32","name":"payloadHash","type":"bytes32"},{"indexed":false,"internalType":"bytes","name":"payload","type":"bytes"}],"name":"MintProofConsumed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"minter","type":"address"},{"indexed":false,"internalType":"bool","name":"isMinter","type":"bool"}],"name":"MinterUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"name","type":"string"},{"indexed":false,"internalType":"string","name":"symbol","type":"string"}],"name":"NameAndSymbolChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOperator","type":"address"},{"indexed":true,"internalType":"address","name":"newOperator","type":"address"}],"name":"OperatorRoleTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousPauser","type":"address"},{"indexed":true,"internalType":"address","name":"newPauser","type":"address"}],"name":"PauserRoleTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"oldFee","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"newFee","type":"uint256"}],"name":"RedeemFeeChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"fee","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"payload","type":"bytes"}],"name":"RedeemRequest","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"","type":"bool"}],"name":"RedeemsForBtcEnabled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"prevValue","type":"address"},{"indexed":true,"internalType":"address","name":"newValue","type":"address"}],"name":"TreasuryAddressChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"Bascule","outputs":[{"internalType":"contract IBascule","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newClaimer","type":"address"}],"name":"addClaimer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newMinter","type":"address"}],"name":"addMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"to","type":"address[]"},{"internalType":"uint256[]","name":"amount","type":"uint256[]"}],"name":"batchMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes[]","name":"payload","type":"bytes[]"},{"internalType":"bytes[]","name":"proof","type":"bytes[]"}],"name":"batchMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes[]","name":"mintPayload","type":"bytes[]"},{"internalType":"bytes[]","name":"proof","type":"bytes[]"},{"internalType":"bytes[]","name":"feePayload","type":"bytes[]"},{"internalType":"bytes[]","name":"userSignature","type":"bytes[]"}],"name":"batchMintWithFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"scriptPubkey","type":"bytes"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"calcUnstakeRequestAmount","outputs":[{"internalType":"uint256","name":"amountAfterFee","type":"uint256"},{"internalType":"bool","name":"isAboveDust","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newVal","type":"address"}],"name":"changeAssetRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newVal","type":"address"}],"name":"changeBascule","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newVal","type":"address"}],"name":"changeConsortium","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"}],"name":"changeNameAndSymbol","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOperator","type":"address"}],"name":"changeOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newPauser","type":"address"}],"name":"changePauser","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newVal","type":"uint256"}],"name":"changeRedeemFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newVal","type":"uint256"}],"name":"changeRedeemForBtcMinAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newValue","type":"address"}],"name":"changeTreasuryAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"consortium","outputs":[{"internalType":"contract INotaryConsortium","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAssetRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"fee","type":"uint256"},{"internalType":"uint256","name":"expiry","type":"uint256"}],"name":"getFeeDigest","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRedeemFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRedeemForBtcMinAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTreasury","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"consortium_","type":"address"},{"internalType":"address","name":"treasury","type":"address"},{"internalType":"address","name":"owner_","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"claimer","type":"address"}],"name":"isClaimer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"}],"name":"isMinter","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isNative","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"isRedeemsEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"rawPayload","type":"bytes"},{"internalType":"bytes","name":"proof","type":"bytes"}],"name":"mint","outputs":[{"internalType":"address","name":"recipient","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"mintPayload","type":"bytes"},{"internalType":"bytes","name":"proof","type":"bytes"},{"internalType":"bytes","name":"feePayload","type":"bytes"},{"internalType":"bytes","name":"userSignature","type":"bytes"}],"name":"mintWithFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pauser","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"ratio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"redeem","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"scriptPubkey","type":"bytes"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"redeemForBtc","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"reinitialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"oldClaimer","type":"address"}],"name":"removeClaimer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"oldMinter","type":"address"}],"name":"removeMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"toNativeCommission","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"toggleRedeemsForBtc","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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